News
Common layout methods for FRP sheets
Time：2025-12-02 16:51:47 Click count：156
1、Instructions:
When arranging the roof FRP sheet, it is generally used to use a continuous strip from the ridge to the eaves for lighting, or a semi continuous strip to the purlins in the house for lighting. If the roof lighting rate does not meet the indoor lighting requirements, the number of lighting strips can be increased (to increase the lighting area) or supplemented by side wall lighting.
The FRP sheet belongs to thermosetting materials, and it is difficult to achieve the same effect as the profiled steel plate during production. Therefore, in the longitudinal overlapping area, there is a risk of water leakage due to mismatched overlapping. Especially for the sheet types with angle relaxation III and 180 ° and 360 ° vertical seam locking edges, it is difficult to handle in point lighting arrangements similar to skylight style, and there is a significant risk of water leakage.
When arranging the roof FRP sheet, it is generally used to use a continuous strip from the ridge to the eaves for lighting, or a semi continuous strip to the purlins in the house for lighting. If the roof lighting rate does not meet the indoor lighting requirements, the number of lighting strips can be increased (to increase the lighting area) or supplemented by side wall lighting.
The FRP sheet belongs to thermosetting materials, and it is difficult to achieve the same effect as the profiled steel plate during production. Therefore, in the longitudinal overlapping area, there is a risk of water leakage due to mismatched overlapping. Especially for the sheet types with angle relaxation III and 180 ° and 360 ° vertical seam locking edges, it is difficult to handle in point lighting arrangements similar to skylight style, and there is a significant risk of water leakage.
When the FRP sheet is arranged too wide, workers are prone to stepping on it during construction, causing the FRP sheet to crack and even leading to safety accidents. Especially when using a natural FRP sheet with added edges for interlocking, the interlocking machine cannot directly press on the natural FRP sheet, resulting in construction failure or high construction costs, and the natural FRP sheet is easily damaged. Therefore, adding a colored steel plate to the natural FRP sheet can be used to solve this problem.
2、Recommended layout method:
Recommended News
